Product Features

Relay module with zero-crossing detection and high inrush-current capability.

Supports both DALI and DMX512 operating modes.

DALI-2 certified and compliant with Device Type 7 (DT7) requirements and IEC 62386-101, IEC 62386-102 and IEC 62386-208.

Complies with the DMX512 protocol and supports RDM remote device management.

The NFC Lighting App or a DALI master controller can be used to configure the DALI address for each channel, power-on state, system failure state and other parameters.

The NFC Lighting App or WiFi-RDM App can be used to configure the DMX start address, address mode, system failure state and other parameters.

Both DALI and DMX support CH01, CH02, CH04 and CH08 address modes, enabling grouped multi-channel control or independent channel control.

Volt-free relay outputs support the switching of AC or DC load circuits for a wide range of applications.

Each channel supports a maximum current of 12 A for reliable operation.

Wide input voltage range: 100–240 Vac.

Compatible with standard 35 mm DIN rails.